Promotic
WikipediaLinkedInYoutubeTwitterFacebook

Communication with Omron PLC devices

Communication possibilities with Omron PLC devices:

FINS protocol

Communication by the FINS protocol in Omron networks.

For this communication in the PROMOTIC system can be used:

- PmOmronFINS - Driver for communication with OMRON PLC devices by the FINS protocol
For easy integration of this driver into the application it is handy to use:
- Preconfigurations in group "Omron PLC"
 
- The communication is done via Ethernet.
- The PROMOTIC application is the MASTER (i.e. it initiates the data transfer) from this communication point of view.

Protocol for C-mode, Host Link

Communication with PLCs of the CS/CJ series.

For this communication in the PROMOTIC system can be used:

- PmOmronC - Driver for communication with OMRON PLC devices with protocol for C-mode
For easy integration of this driver into the application it is handy to use:
- Preconfigurations in group "Omron PLC"
 
- The communication is done via the computer's serial port (COM1, COM2 ...).
- The PROMOTIC application is the MASTER (i.e. it initiates the data transfer) from this communication point of view.

DeviceNet bus

The communication on the DeviceNet bus is accessible for the PROMOTIC application by the OPC interface. The PROMOTIC application is the OPC client and it communicates with the OPC server. The OPC server for this communication has to be purchased at the HW supplier.
PROMOTIC 8.3.20 SCADA system documentation - MICROSYS, spol. s r.o.

Send page remarkContact responsible person
© MICROSYS, spol. s r. o.Tavičská 845/21 703 00 Ostrava-Vítkovice