Preconfiguration "Wago BACnet Controller and PmBACnet driver - Communication set with data and panel"

Configuration of the PmBACnet communication driver with test panel for Wago BACnet/IP Controller 750-830.

This preconfiguration can be activated when creating a new object (e.g. by "New object ..." in the context menu of the object or by pressing the Insert key after selecting the object).

This preconfiguration is included in the "/ Communication / Protocols and other communications / BACnet" group.

This preconfiguration can be created in the PmaFolder, PmaRoot or PmaPrototype object.

- The preconfiguration creates an object of the PmaFolder type containing PmaComm object with PmaCommGroup subobject and following objects: PmaPanel.

- The preconfiguration is created including the panel (object of the PmaPanel type) is functional also as Web panel.

- The panel serves for communication testing and it is not essential for the communication functionality.

The required binary and analog I/O values are created and connected in the PmaData object via ExtComm to the variables in the PLC device in the order from 0 to x. If it is required to connect additional items, then these items are created in the PmaData object, but the connection to desired values must be created subsequently. After the application is launched it is possible to observe these variables in the WAGO BACnet - Data panel.

These configurators can be set before the preconfiguration is created:

The name of created object	Name of the object created in the Pma object tree. The maximum name length is 30 characters. This is a system name, so it must contain only alphanumeric and must not contain any diacritics (i.e. national dependent characters), empty string, spaces and first character must not be a number. Default: "WagoBACnet"

Network address	Network address of the remote device (e.g. of the PLC device), to which the communication will be connected. The address can be entered as: - IPv4 full address (e.g. "192.168.0.15") - IPv4 address of this computer (i.e. "127.0.0.1") - IPv4 computer name (e.g. "server11") - IPv4 name of this computer (i.e. "localhost") - IPv6 full address (e.g. "2a02:c38:8136:800a:37a:ab66:6fc9:accd") - IPv6 address of this computer (i.e. "::1") Macro expression can be used for input (it is evaluated after the application is launched). After the preconfiguration is created, the "PmaComm > Setting the parameters of the Ethernet-client > Network address" configurator will be set to this value.
Communication refresh rate [ms]	The period in milliseconds to be used for reading the current data by the PROMOTIC application. After the preconfiguration is created, the "PmaCommGroup > Parameters > Communication refresh rate [ms]" configurator will be set to this value.

Create examples of testing data	A set of exemplary data is created
Number of binary outputs
Number of binary inputs
Number of analog outputs
Number of analog inputs
Number of additional items

Create panel for test data	Creates panel that monitors the statistics of communication values
Panel title	Displayed in the panel header

Create PmaCommMsg for loading informations from the PLC device	Creates the PmaCommMsg object that allows to load information from the PLC device.
Create panel that is used for displaying and saving information from the PLC device.	The panel is used for running the Run method and also for saving the displayed information into the file.