Promotic

Preconfigurations in group "Communication protocols"

This preconfiguration list is opened when creating a new object (e.g. by "New object ..." in the local object menu or after pressing the Insert key after selecting the object).

The preconfigurations in this group create object(s), with some desired functionality. The object creation can be performed in the PmaFolder, PmaRoot objects, and only some in the PmaPanel object. After selecting the preconfiguration a new object is created (usually PmaFolder or PmaPanel), where another subobjects can be created, all configured in order to provide the desired functionality.
Creating the object via the preconfiguration is therefore much easier then creating object from the group Basic, where the objects created are "empty" and it is necessary to configure them properly.
Preconfiguration list:

Communication protocols
- OPC DA: Preconfigurations for communication driver PmOpcUaClient
- OPC UA: Preconfigurations for communication driver PmOpcUaClient
- PmChar configurable protocol: Preconfigurations for communication driver PmChar.
- Modbus: Preconfigurations for communication driver PmModbusMr and PmModbusSl.
- M-BUS: Preconfigurations for communication driver PmMBus.
- S-BUS: Preconfigurations for communication driver PmSBUS.
- S7: Preconfigurations for communication driver PmS7.
- 3964 and RK512: Preconfigurations for communication driver Pm3964.
- IEC8705: Preconfigurations for communication driver PmIEC8705.
- IEC62056: Preconfigurations for communication driver PmIEC62056.
- BACnet: Preconfigurations for communication driver PmBACnet.
- KNX: Preconfigurations for communication driver PmKNX.
- SNMP: Preconfigurations for communication driver PmSNMP.
- Sigfox: Communication with service Sigfox
- MQTT: Communication with the broker by the MQTT protocol
- NET0: Preconfigurations for communication driver PmNET0.
- DALI: Preconfigurations for communication driver PmChar.
PROMOTIC 9.0.21 SCADA system documentation - MICROSYS, spol. s r.o.

Send page remarkContact responsible person
© MICROSYS, spol. s r. o.