Preconfiguration "PmBACnet - Minimal set of the PmaComm object"

Communication driver configuration PmBACnet - Driver for communication by the BACnet protocol.

This preconfiguration can be activated when creating a new object (e.g. by "New object ..." in the local object menu or by pressing the Insert key after selecting the object) and is included in the group: "/ Communication / Protocols and other communications / BACnet".
This preconfiguration can be created in the object: PmaFolder or PmaRoot.

These configurators can be set before the preconfiguration is created:

The name of created object	Name of the object created in the tree of Pma objects. The maximum name length is 30 characters. This is a system name, so it must contain only alphanumeric and must not contain any diacritics (i.e. national dependent chars), empty string, spaces and the first character must not be a number. Default: "Comm"

Network address	Network address to which the communication will be connected. The address can be entered by both IPv4 address (e.g. 192.168.0.15) or by computer name (e.g. server11). The IPv4 address 127.0.0.1 is the local address of this computer. Macro expression can be used for input (it is evaluated after starting the application). After the preconfiguration is created, the "PmaComm > Setting the parameters of the Ethernet-client > Network address" configurator will be set to this value.

Create examples of testing data	A set of exemplary data is created
Create PmaCommMsg for reading information from the PLC device	Creates the PmaCommMsg object that allows to read information from the connected PLC.