Update cookies preferences

Preconfiguration "Two-way valve"

Creates compound object configured as two-way valve without analog.

This preconfiguration can be activated when creating a new Pmg object and is included in the group: "/ Technology / Valve / Active objects (PmgCanvas)".

After connecting the variables of this object by the "PP - Pma object property" data binding to the configured variables of the PmaData object, the real status of such device is indicated.

The Status and Mode variables are used for such purpose. The value of the Mode variable defines the working mode of the device and is preset as follows:
1 = automated regulation mode
2 = manual regulation mode
3 = manually ON
4 = manually OFF
5 = disabled (for pump)
Any other value causes error signal.
The Status variable represents the device status and the default (preconfigured) meaning of individual bits of this variable is apparent based on the information present at the beginning of the "Draw" tab script of the PmgCanvas object.
All these variables in the Pmg object are read only.

The devId parameter serves as device identifier.
The mode change control is executed by means of the onMenuFill and onMenuSelect events. It is supposed in this event that the panel method DeviceCmd exists with devId and mode parameters that commands the control system based on user request to change the device mode. There is an example script present in this event that emulates the reaction of the control system.
These configurators can be set before the preconfiguration is created:
The name of created objectName (identifier) of the Pmg object. It is used for obtaining the Pmg object by the PmgObject.Items method.
This configurator sets the initial value of the Name property.
The maximum name length is 30 characters.
This is a system name, so it must contain only alphanumeric and must not contain any diacritics (i.e. national dependent characters), empty string, spaces and the first character must not be a number.
Device identifierTechnical name (identifier) of the device
Emulation of control system commandEmulation of control system command for device status change

Pm8.02.11: Created
PROMOTIC 9.0.28 SCADA system documentation MICROSYS, spol. s r.o.

Send page remarkContact responsible person
© MICROSYS, spol. s r.o.