Promotic

Ranges - tab of the PmgObject object

Description:
Setting technological and instrumental ranges facilitates watching the measured variables. If the technological and instrumental ranges are enabled, then watching the measured variables is set in two levels. This watching is ensured by a graphical viewing.
If the option of some range is not checked, then the definition of the minimum and maximum value of these ranges (and setting the color) has no meaning.
If the option of ranges is checked, then the minimum and maximum of these ranges is shown on the scale in the form of the line in defined color (minimum and maximum can have different color) on the position of the defined value. If the value of the measured variable exceeds the maximum limit, then the color of the indicator changes to the color of this maximum. It is analogical when a minimum is under passed.
If both ranges are defined at the same time, then on exceeding the first maximum (less value from both maximums) the color of the indicator changes according to the color of the first maximum. On exceeding the second maximum (greater value from both maximums) the color of the indicator changes according to the color of the second maximum. It is analogical when minimums are under passed.

This tab with its configurators is common for the following Pmg objects: PmgBarBox and PmgSliderBox.
Configurators:
Enable Limit1 = technological ranges
Enable Limit2 = instrumental ranges
Limit2 > Maximum > ValueValue for Maximum and Limit2
Limit2 > Maximum > ColorColor for Maximum and Limit2
Limit1 > Maximum > ValueValue for Maximum and Limit1
Limit1 > Maximum > ColorColor for Maximum and Limit1
Limit1 > Minimum > ValueValue for Minimum and Limit1
Limit1 > Minimum > ColorColor for Minimum and Limit1
Limit2 > Minimum > ValueValue for Minimum and Limit2
Limit2 > Minimum > ColorColor for Minimum and Limit2
PROMOTIC 9.0.27 SCADA system documentation MICROSYS, spol. s r.o.

Send page remarkContact responsible person
© MICROSYS, spol. s r.o.