Description of the configuration of the PLC device of the iQ-R/iQ-F series for communication by the PmMelsecQA driver

In order to communicate with PLC devices of the iQ-R and iQ-F series, it is necessary to set following settings in the configuration software (in this case the GX Works3 version 1.047Z was used):

Select: Navigation->Parameter->(CPU)->Module Parameter.

Communication Data Code: ASCII
Enable/Disable Online Change: Enable All (SLMP)

Then open the "Detailed Setting" window in External Device Configuration.
From the list of modules on the right side add: SLMP Connection Module. And then enter the port number into the Port No. column.
PROMOTIC 9.0.27 SCADA system documentation MICROSYS, spol. s r.o.

Send page remarkContact responsible person
© MICROSYS, spol. s r.o.