Communication with DDC controllers by the Honeywell company
The
Honeywell company produces more types of devices with more communication possibilities. The following sections deal with individual possibilities.
1. C-BUS: communication with EXCEL family DDC controllers
For communication of the PROMOTIC application by the
C-BUS protocol with the
EXCEL 5000 (
EXCEL 20/50/80/100/500/600/800) family DDC controllers it can be used:
1) The
OPC server by the
KZK company. The
OPC server is also available in a version for
EXCEL IRC and
EXCEL EMC controllers.
Trade terms:
The usage
OPC (the
PmOpcUaClient communication driver or
PmaOpcDaClient object) requires purchase of the
"PmOPC" licence. When developing the application in the freeware mode
PmFree, or with
development environment and while testing it in runtime, this component is always functional.
2) Hardware converter (by the
KZK company)
for the BACnet protocol for Ethernet.
Trade terms:
The
PmBACnet communication driver requires purchase of the
"PmBACnet" licence. When developing the application in the freeware mode
PmFree, or with
development environment and while testing it in runtime, this component is always functional.
Technical support:
KZK Ltd. Mlýnská 570, 798 17 Smržice, Czechia
Email:
info@cbusopcserver.com,
http://www.cbusopcserver.com, Phone: +420 581 111 685
2. Communication with TDC300 DDC controllers
It is possible to communicate with the
TDC300 DDC controllers by the
Modbus RTU protocol.
For this communication in the PROMOTIC system can be used:
or
3. Communication with the UDC family DDC regulators
Regulators of the older
UDC 1000/1500 series even of the newer
UDC 1200/1700 series communicate over the interface
RS485 by the
ASCII and
Modbus RTU protocols.
For this communication in the PROMOTIC system can be used:
or