Communication with Domat PLC devices

PROMOTIC system integrates the DOMAT PLC devices by means of communication protocols.
See:

Domat regulators and sub-stations Mark

The Mark series process substations bring the flexibility of free programming to the I/O module level.
The new range of sub-stations offers compact IMIO110.2 (16 I/O) and ICIO205.2 (30 I/O) controllers with Ethernet and RS485 interfaces.
The markMX.3 sub-station with 88 I/O is designed for larger projects.

Direct link here: http://www.domat-int.com/en/mark-process-stations

Domat regulators and sub-stations Wall

In the framework of Domat's cooperation with the Wago company (a leading German manufacturer of components for electrical engineering and programmable PLCs) sub-stations with Domat Runtim were launched in 2019 under the Wall label.
The substations are fully programmable in the Domat IDE environment.

Direct link here: http://www.domat-int.com/en/wall-compact-process-stations

Communication by the BACnet protocol

For this communication in the PROMOTIC system can be used:

- PmBACnet - Driver for communication by the BACnet protocol
For easy integration of this driver into the application it is handy to use:

- Preconfiguration "PmBACnet - Communication set with data and panel for non-defined device"
Preconfiguration also supports reading/writing the time schedules.

Communication by the Modbus protocol

For this communication in the PROMOTIC system can be used:

- PmModbusMr - Driver for communication by the Modbus Master protocol
For easy integration of this driver into the application it is handy to use:

- Preconfiguration "PmModbusMr - Communication set with data and panel for non-defined device"