Communication with the devices by the LUMEL S.A. company

HT20IoT

Temperature and humidity data logger for IoT applications
HT20IoT data logger has been designed to measure, monitor and record temperature and humidity. It is a perfect solution for any facilities where monitoring and recording such values are very important for the accuracy of the whole process for example: in server rooms, drug and food warehouses, laboratories, museums or glasshouses.

Preconfiguration "PmModbusMr - LUMEL HT20IoT - temperature and humidity data logger for IoT applications (Modbus TCP/IP), Communication set with data and panel"

ND31Lite

Power network meter with Modbus RTU (RS-485) protocol
The ND31LITE network parameter meter has been designed specifically for applications requiring high-quality measurement equipment that will provide the customer the ability to monitor network parameters via the popular and reliable RS-485 interface with MODBUS protocol.

Preconfiguration "PmModbusMr - LUMEL ND31Lite - power network meter with Modbus RTU (RS-485) protocol (Modbus RTU), Communication set with data and panel"

N30U

Programmable digital meter of temperature, resistance and standard signals
The N30U meter is a programmable digital panel meter destined for measurements of signals originating from standard sensors destined for temperature measurements and for the measurement of analog standard signals applied in automation. Additionally, the meter enables the indication of the current time. The readout field is a LED display, which allows the exposition of results in colours: red, green and orange. The measured input signal can be arbitrary converted by means of a 21-point individual characteristic.

Preconfiguration "PmModbusMr - LUMEL N30U - programmable digital meter of temperature, resistance and standard signals (Modbus RTU), Communication set with data and panel"

N32U

Programmable digital meter of temperature, resistance and standard signals
The N32U meter is a digital panel meter adapted to be fixed to the panel. The N32U meters are designed to measure standard analog signals used in automation and enable the measurement of standardized voltage and current signals, the signals from RTD and thermocouple sensors. The measuring value can be freely converted into the required value using the mathematical functions or an individual characteristic.

Preconfiguration "PmModbusMr - LUMEL N32U - programmable digital meter of temperature, resistance and standard signals (Modbus RTU), Communication set with data and panel"

ND20

1 and 3-phase power network meter
The N20D meter is a digital programmable panel meter destined for the measurement of single-phase power network parameters (2-wire network) and 3-phase, 3,4-wire network in balanced and unbalanced systems with the simultaneous display of measured quantities on a LCD display. The meter enables the control and optimization of power electronics devices, systems and industrial installation operations. The meter ensures the measurement of: rms values of voltage and current, active, reactive and apparent power, active, reactive energy, power factors, frequency, 15, 30, 60 minutes’ mean active power, archive of power profile, THD and harmonic measurements. Additionally, the current value in the neutral wire is calculated. Voltages and currents are multiplied by given voltage and current ratios of measuring transformers. Indications of power and energy take into consideration values of programmed ratios. The value of each measured quantity can be transmitted to the master system through the RS-485 interface. The relay output signals the overflow of the chosen quantity, and the pulse output can be used for the consumption check of 3-phase. active and reactive energy

Preconfiguration "PmModbusMr - LUMEL ND20 - 1 and 3-phase power network meter (Modbus RTU), Communication set with data and panel"

ND30IoT, NR30IoT

Power network meter with Ethernet and recording dedicated to IoT applications
ND30IoT, NR30IoT and ND31 meters are a programmable digital instrument designed for the measurement of 1-phase 2-wire and 3-phase 3 and 4-wire power network parameters in balanced or unbalanced systems. The measured values are displayed on a 3,5’’ TFT full-color screen, resolution: 320 x 240 pixel (for ND3X) or on a 20 x 4 LCD character display (for NR3X). Meters enables control and optimization of the power electronic devices, systems and industrial installations. Meters provides measurement of: RMS of voltage and current, active, reactive and apparent power, active, reactive and apparent energy, power factors, frequency, the harmonics of current and voltage /up to 63rd/, THD of voltage and current, averaged active and apparent power P Demand, S Demand, averaged current I Demand /15, 30 or 60 minutes/. Voltages and currents are multiplied by given voltage and current ratios of the measuring transformers. Power and energy indications take into account all programmed ratio values. The value of each measured value can be transmitted to the master system via the RS-485 or Ethernet interface. Three relay outputs signal the overflow of the chosen value and the programmable analog output maps the assigned parameter.

Preconfiguration "PmModbusMr - LUMEL ND30IoT/NR30IoT/ND31 - power network meter with Ethernet and recording (Communication by the Modbus protocol) - Communication set with data and panel"

NMID30

Energy meter for single- and three-phase networks with MID certificate 1/5A (NMID30-1) or MID certificate 100A (NMID30-2)
NMID30-1 and NMID30-2 energy meters are a modern devices designed to monitor basic electrical parameters. They are designed for single-phase and three-phase network and equipped with a pulse output and an RS-485 digital link for remote monitoring of measured parameters or BMS systems.

Preconfiguration "PmModbusMr - LUMEL NMID30-1/NMID30-2 - energy meter for single- and three-phase networks with MID certificate 1/5A or MID certificate 100A (Modbus RTU), Communication set with data and panel"

NR32

Energy meter for 3-phase network
The NR32 energy meter is a modern device designed to monitor basic electrical parameters and analyze current and voltage harmonics up to 31st. It is dedicated for 1-phase and 3-phase networks and is optionally equipped with two alarm relay outputs and two pulse outputs for energy consumption control.

Preconfiguration "PmModbusMr - LUMEL NR32 - energy meter for 3-phase network (Modbus RTU), Communication set with data and panel"

P18

Humidity and temperature transducers with digital and analog output
P18 and P18D transducer are devices destined for the continuous measurement and conversion of relative humidity and ambient temperature into a digital or analog standard signal. Additionally P18D transducer is equipped in LCD display.

Preconfiguration "PmModbusMr - LUMEL P18 - humidity and temperature transducers with digital and analog output (Modbus RTU), Communication set with data and panel"

RE72

Controller - 3 outputs
The RE72 controller is destined for the temperature control in plastics, food, dehydration industries and everywhere when the temperature change stabilization is necessary. The measuring input is universal for resistance thermometers (RTD), thermocouple sensors (TC), or for linear standard signals. The controller has three outputs enabling the two-step control, step-bystep three-step control, three-step control of heating-cooling type and alarm signaling. The two-step control is acc. to the PID or ON-OFF algorithm. The innovative SMART PID algorithm has been implemented in the controller.

Preconfiguration "PmModbusMr - LUMEL RE72 - controller, 3 outputs (Modbus RTU), Communication set with data and panel"

ND45

Network parameter analyser / datalogger
The ND45 analyzer is designed for the measurement and analysis of three-phase, 3- or 4-wire power network parameters in balanced or unbalanced systems. Measurement and recording of over 500 electric energy quality parameters, class A for selected parameters, harmonics and interharmonics up to 51st, energy measurement in 4 tariffs, recording of measurements before and after events (dips and swells), configurable display and web Server.

Preconfiguration "PmModbusMr - LUMEL ND45 - network parameter analyser / datalogger (Communication by the Modbus protocol) - Communication set with data and panel"

RE92

Dual loop controller
The RE92 is an advanced dual loop controller for industrial use. It was designed for demanding industrial applications. RE92 can control two controlled objects independently or control two physical values in one object (for example in the two-zone furnaces).

Preconfiguration "PmModbusMr - LUMEL RE92 - Dual loop controller (Communication by the Modbus protocol) - Communication set with data and panel"