Promotic
WikipediaLinkedInYoutubeTwitterFacebook

Meter - tab of the PmgMeterBox object

Description:
Meter properties.
Configurators:
Meter valueValue displayed by the deviation of the panel meter finger.

This configurator sets the initial value of the Value property.

Low limitValue of the low limit.

This configurator sets the initial value of the ValueMin property.

High limitValue of the high limit.

This configurator sets the initial value of the ValueMax property.

Scale angleSetting the size of the circle sector where the value is shown by means of the finger. The size is entered in angle degrees.
Hand colorColor of the hand. Depending on the settings and when changing values, this color can change. See Ranges.
Position of X-fingerDistance of the finger center from the left border of the object (in pixels). The finger center is always the center of the scale arc at the same time.
Position of Y-fingerDistance of the finger center from the upper border of the object (in pixels). The finger center is always the center of the scale arc at the same time.
Finger lengthFinger length (in pixels). It is measured from the hand center to the scale arc. The hand length also specifies the scale arc radius (while changing the hand length the scale arc radius is also being modified). If you want to change the hand length and while keeping the scale arc radius unchanged then you must change both the finger length and the value of the "Scale distance" configurator on the "Scale" tab.
PROMOTIC 9.0.15 SCADA system documentation - MICROSYS, spol. s r.o.

Send page remarkContact responsible person
© MICROSYS, spol. s r. o.Tavičská 845/21 703 00 Ostrava-Vítkovice