Promotic
WikipediaLinkedInYoutubeTwitterFacebook

Scale - page of item PmiItem

Description:
Setting for showing the meter scale - location, color, font, number and length of ticks, scale description, etc.

This page with its configurators is common for the following graphic items: PmiBarPane, PmiSliderPane and PmiPanelMeter.

Configuration items:
Right / DownSee: "Left / Up".
Left / UpOption of the scale location relative to the column.
Options "Right" and "Left" are considered for the case when the Direction of growing configurator is set to "Up" or "Down".
Options "Down" and "Up" are considered for the case when the Direction of growing configurator is set to "Right" or "Left".

Both options can be checked at once.

Scale color Setting the color of scale main and extra ticks (at the panel meter also the color of the scale arc)
Color of scale descriptionSetting the font color of the scale description
Font of scale descriptionSetting the font of the scale description
Scale lengthLength (in pixels) between the scale and the indicator of the measured variable (a bar or a finger)
Description lengthLength between the scale and the scale description (in pixels)
Length of main ticksLength of main ticks of the scale (in pixels). Main ticks can be with or without the description. If extra ticks are defined as well, the length of main ticks should be greater than the length of extra ticks.
Length of extra ticksLength of extra ticks of the scale (in pixels). Extra ticks are always without the description and they should be shorter than main ticks.
Number of main ticksNumber of main ticks defines on how many parts is the scale divided. At the same time it is defined by this how many ticks can the description have. If the scale range is, for example, from 0 to 4, there can be 5 main ticks (0,1,2,3,4) or 3 (0,2,4), but also 9 (0,0.5,1.0, ... 4.5,5.0).
Number of extra ticks in the main tick By this value the number of extra ticks between two main ticks is specified. These extra ticks have no description.
Which main tick has the descriptionHere the entered value specifies at which tick from the scale main ticks the value to the appropriate tick is shown. If this number is for example 3, the first main tick has the description, the second and the third ticks don't have the description, the forth main tick has the description, etc. Thin number must be an integer and greater or equal than one.
Number of decimal placesSetting the precision of the scale description
Buttons on the right side of the configuration window of each item:
© MICROSYS, spol. s r. o.Tavičská 845/21 703 00 Ostrava-Vítkovice