Connect Promotic to S7-1200

This is the main technical forum for discussing problems that were encountered by users while developing PROMOTIC applications, and their possible solutions.

Connect Promotic to S7-1200

Postby Kramer » Tue 17. Oct 2017 8:46:13

Hello,
i want to connect S7-1200 to Promotic with PmS7 (ethernet).
i don't know how to set up the S7-1200 PLC.
In the PLC properties i selected "Full access" and checked "Permit access with PUT/GET communication from remote partner".
Is that all or must i configure an S7 connection?
Kramer
 
Posts: 1
Joined: Tue 17. Oct 2017 8:24:46

Re: Connect Promotic to S7-1200

Postby admin » Tue 31. Oct 2017 14:16:39

Hello,

Please study the PROMOTIC SCADA software documentation and related preconfigurations and examples:

https://www.promotic.eu/en/pmdoc/Subsys ... rs/kS7.htm
admin
Administrátor
 
Posts: 67
Joined: Wed 12. Dec 2012 15:43:09

Re: Connect Promotic to S7-1200

Postby minder » Tue 13. Feb 2018 20:43:25

Hello,

is it possible to connect Promotic scada with PmS7 driver and three s7 1200 PLC's remotely, via internet? I have the static IP on site...
minder
 
Posts: 6
Joined: Tue 13. Feb 2018 20:35:53

Re: Connect Promotic to S7-1200

Postby admin » Mon 05. Mar 2018 9:27:42

Hello,

First you need to configure your network setup so the PLC is really accessible from the Internet (so it can be PINGed from outside).

Then enter the IP address into the preconfiguration and test the communication:

https://www.promotic.eu/en/pmdoc/Subsys ... ic1200.htm

More details here:

https://www.promotic.eu/en/pmdoc/Subsys ... rs/kS7.htm
admin
Administrátor
 
Posts: 67
Joined: Wed 12. Dec 2012 15:43:09

Re: Connect Promotic to S7-1200

Postby CoraDias » Fri 16. Mar 2018 14:56:34

Hi...I used a direct cable. I was able to access a used 1215C cpu FS04 . But I could never succeded what I did with a fresh cpu. It did not saw any compatible siemens accessable device when I search. The leds of the cpu at eth port was ON when I connect it my pc. I reset my eth adapter, delete and reinstall its driver. I was installed trial version of tia portal V14 some days ago.

pcba usa
Last edited by CoraDias on Fri 06. Apr 2018 18:39:57, edited 1 time in total.
CoraDias
 
Posts: 1
Joined: Fri 16. Mar 2018 14:51:56

Re: Connect Promotic to S7-1200

Postby admin » Tue 03. Apr 2018 7:06:14

Hello,

There are critical settings you have to do in TIA portal before connecting to S7 PLC:

https://www.promotic.eu/en/pmdoc/Subsys ... rs/kS7.htm

See the bootom of the page "Important settings of Simatic PLC communication by the TIA portal software"
admin
Administrátor
 
Posts: 67
Joined: Wed 12. Dec 2012 15:43:09


Return to I don't know how to...

Who is online

Users browsing this forum: No registered users and 3 guests

cron