Preconfiguration "PmModbusMr - Papouch PAPAGO 2x measurement (Modbus TCP/IP) - Communication set with data and panel"

Communication by the Modbus TCP/IP protocol with PAPAGO device

See also Communication with Papouch meters (Czech republic).

The valid TCP-IP address must be set for the device according to the corresponding network environment. The configuration is described in the user manual supplied by the manufacturer.
This preconfiguration can be activated when creating a new object (e.g. by "New object" in the local object menu or by pressing the Insert key after selecting the object) and is included in the group: " / Communication / Modbus communication protocol".

This preconfiguration can be used with the objects: PmFolder or PmRoot.

- Preconfiguration creates an object of type PmFolder containing PmComm object with PmCommData subobject and following objects: PmPanel, PmData, PmTrend.
- The preconfiguration is created including the panel (PmPanel object) functionality as a Web panel.
- The panel is used for communication testing and it is not essential for the functionality.
In the PmComm object named Comm the communication parameters are set (Network address, ...).

The PmCommData object named data includes a Parameters page where Special Parameters are defined (see PmModbusMr - Driver for communication by the Modbus Master protocol). On the Data page, the items are imported by the data extensions of the items defined in the PmData object (see ExtComm). Each Data corresponds to the selected device type by its structure and name.

These configurators can be set before the preconfiguration is created:
The name of created objectName of the object created in the application object tree. This is a system name and must not contain diacritics, empty string, spaces and the first character must not be a number.

Default: "CommPapago"

Meter type2x measurement according to the device type
2TH - 2x temperature and humidity meter
2PT - 2x thermometer for Pt100/1000
2TC - 2x thermometer for K-type thermocouple
Network addressNetwork address to which the communication will be connected. The address can be entered by both IP address (e.g. or by name (e.g. server11).

Macro expression can be used for input (it is evaluated while the application is launching).

After this preconfiguration is created, the configurator is se to: PmComm > Settings of the Ethernet parameters > Network address
Communication refresh rate [ms]The time period in milliseconds to be used for reading the data by the PROMOTIC application. After this preconfiguration is created, the configurator is se to: PmCommData > Parameters > Communication refresh rate [ms]
Panel titleDisplayed in the panel header
PROMOTIC 8.3.20 SCADA system documentation - MICROSYS, spol. s r.o.

Send page remarkContact responsible person
© MICROSYS, spol. s r. o.Tavičská 845/21 703 00 Ostrava-Vítkovice