PROMOTIC dual monitor application for continuous monitoring of a small hydropower plant with four adustable-blade-type turbines. The control and data acquisition is built on the PLC ABB AC500.
PROMOTIC double-monitor application for continuous monitoring of a small hydropower plant with a adustable-blade-type turbine. The control and data acquisition is built on the PLC ABB AC500.
Energy terminals Mělník 1, Prostějov and Počerady. Connection of dispatcher centers to control systems ZAT, METSO and SIEMENS. Interconnection with CEZ, ČEPS and E.On dispatcher centers. The terminal monitors the production and supply of electrical work and gas consumption and evaluates actual operation.
Operational monitoring of four biogas stations in the Czech Republic and Slovakia. The control system is built on the Schneider M340 (Twido) PLC with communication via the OPC server.
Digital control system of electric switching station in Pylos (Greece) is designed to monitor all operating parameters of the power supply. The system monitors the status of all electrical equipment and performs continuous measurement of the parameters of each part of the circuit (P, Q, I, V, f, cosφ). The assembly consists of one 150kV CB, and one 150 / 20kV power transformer with OLTC 6.20 kV.
Photovoltaic monitoring system built on AMiT AMiNi-ES PLC and Vacon 250kW inverters (4x). OOM electricity meter monitoring, inverter operation reports, automatic sending of data to OKTE on a daily and monthly basis, sending of alarm SMS.
Energy monitoring in Tatra plants built on AMiT PLCs. The system monitors operation of the boiler room, 9 painting and sanding boxes and 2 drying tunnels - filtration processes, air heaters, air recuperation, water filtration, etc.
Centralized energy dispatching center of the enterprise based on AMiT control systems. The SCADA system controls the heating and hot water production (5 local boilers - 2x400 kW, 2x300 kW, 160 kW), control of ROBUR hot air generators and infrared heaters (MANDÍK and KASPO).
System for monitoring the operation of 32 diesel fuel generators in Ghana (Africa). The system periodically reads 15 operation variables from each generator. The values are subsequently processed and evaluated. Communication between dispatcher PCs and generators is based on the standard Modbus protocol.
Control system of 3 coal transport lines to the boiler built on the Simatic S7 PLC. Control and signaling of the status of individual belt conveyors, roll carts, sinking plows, distributing flaps. Level measurements of coal in the silos, material quantity statistics.
Boiler coal line transport control system built on GE FANUC PLC. Control and signaling of individual belt conveyors, chain feeders, telescopic claws, sinking plows. Capture of coal in the tanks, material quantity statistics.
System for continuous monitoring of the operation of a hybrid steam boiler in Klatovy heating plant built on the Schneider Premium PLC.
Complex system for monitoring the operation of the chemical water treatment plant in the Klatovy heat plant. Communication with 1x PLC Schneider Premium Unity, 2x PLC Modicon TSX Micro, 1x PLC Modicon M340, 1x PLC Twido, Advantech ADAM.
An extensive comprehensive manufacturing-information system for monitoring and evaluating machine operation (thermostats manufacturing line) built on 24x PLCs Hitachi, Sprecher_Schuh, Simatic, Mitsubishi. Client x server architecture (1x PC Server + 12x PC Client + 15x PmWebClient). Import data from predefined tables and templates in MS Excel. Archiving data into the MS SQL Server central database, documenting production history.
The system monitors operation of pulp production line. Identifies real-time movement and status of all packets on the packing line, assigns weight to each package, ensures proper packet printing with production data and ensures accurate records of the number of packages produced and dispatched. The system archives all important system data on the Oracle database server and passes data regarding manufactured products and their quality to the enterprise SAP IS. All user and operator accesses use the Web interface.
Monitoring of mineral springs in four localities in Slovakia. Intelligent ICP modules (Advantech ADAM) are used data acquisition. The entire data collection system is built on the PROMOTIC SCADA software Web interface. Thanks to this, the Slovak Ministry of Health has direct access to measured values in real time.
Barley processing technology is monitored and managed from the dispatcher center using the PROMOTIC SCADA system. On the computer where this visualization is running, an OPC server is installed, which communicates with the control systems, collects data and configures them as needed.
The PROMOTIC METERING software system performs automatic readings and processing of energy meter data in the GeminiB building complex in Prague. Measuring range: 64 KWZ Moeller type meters, 91 calorimeters of heat, 38 water meters, 1 main cold calorimeter. The system was created as a configurable application - the meter addresses and other necessary parameters are loaded from external configuration file. The system also includes a Web server that allows visualization of selected data on visualization web clients.
Signaling and control of electric heating of railway switches in 4 railway stations (MAV - Hungary) Mezötur, Gyoma, Nagylapos and Zuglo. The operator can determine the status of the individual railway switches in the station (heating / not-heating or malfunction) and, at his discretion, it is possible to switch the heating of individual switches manually or to adjust the settings of automatic heating.
The CODIS system for remote diagnostics of technological systems of the Czech railway network operated by the Czech Railway Transport Administration company is a very extensive, complex, distributed monitoring system consisting of four pairs of redundant integration servers (2x Brno, 2x Přerov, 2x Ostrava, Prague). There are over 100 railway stations (integration concentrators) connected to these integration servers. The monitoring section consists of over 40 client stations. The application includes more than 450,000 data points.
The A-RCMS monitoring system is operated by the Army of the Czech Republic. It is designed as a communication infrastructure monitoring system. It is designed to support administrators in monitoring and managing of IT systems. Monitoring and control of smart network elements through the SNMP interface. Continuous monitoring of the availability of network elements through ICMP protocol (ping). Monitoring system resources through the WMI interface.
The comprehensive ID-6.2 airport control and monitoring system was deployed at Magnitogorsk (Russia) and Bautzen (Germany) airports and can be deployed at all types of airports from the smallest to the largest, from I. to III. category and heliports. It can serve as a complex system that provides unified user interface to existing subsystems, or can serve as a control and monitoring system for individual subsystems (light signaling and signaling equipment for take-off, landing and taxiways, radionavigation devices, radiocommunication equipment, power equipment, meteorological devices, fire and security signaling, communication and data infrastructures, etc.).
Using CRS PROMOTIC and the application of intelligent detection systems in Považská Bystrica on the I / 61 road significantly improved traffic fluency and safety at the crossing point of the critical junction. The system evaluates traffic density from individual directions with cameras, and in case of a problem (traffic jam), the control system solves the situation by changing the timing of the CSS (road lights) in order to prefer the problematic direction or redirect traffic to the detour routes by means of variable traffic signs.
The system carries out continuous monitoring of the biogas station focusing on the sludge management, boiler room and gas engine room. The SCADA application communicates with 2x PLC SAIA PCD2 through Merz OPC server.
The company Olpran Olomouc operates a stock picker system that performs storing or removing of goods, manipulating with a mobile rack tray and recording all stored goods in the warehouse. The system gives commands to perform all warehouse operations, controls the movement of the mobile storage stacker, records all warehouse operations performed, scans and evaluates the bar codes of stored goods and performs other necessary operations.
The application is running as freeware (without the need to purchase a license). The application performs bar code reading using a handheld reader via the serial port RS232 (COM1). The reading result determines whether the read barcode is the same as the test code and archives each read code and the name of the operator that performed the test.
The application is running as freeware (without the need to purchase a license). The application performs the force (tension) monitoring on the production line with the KISTLER strain gauge via the Papouch AD4ETH converter.
The home marine aquarium monitoring system is based on the Netbook on which the PROMOTIC application under PmFree (Freeware) is installed. This station serves as an access point for monitoring aquarium status from a Web browser, mobile device, or directly from Windows. The program communicates with the PLC (ABB AC500eCO), which manages the aquarium itself via the MODBUS protocol over a local area network.
Level Basic SCADA is designed as a simple SCADA system for collecting and archiving data from Dinel ULM-53L ultrasonic level meters with remote parameterization. Communication with the level meters is done via the RS-485 serial link using the Dinel URC-485 USB / RS485 converter. The communication protocol is MODBUS RTU.
Applications for monitoring and control of the coal gasification process were developed as part of a research project at the Technical University in Košice. The application monitors process variables such as pressures and flow rates of oxidants, coal temperatures, gas concentrations, etc. From the monitoring system, the operator can control and adjust the stabilization and optimization controllers.
This section contains a complete list of PROMOTIC references. You can filter the references according to various criteria (application type, country, etc.).