Preconfigurations PmBACnet - Communication set with data and panel for non-defined device

Configuration of the PmBACnet communication driver.
This preconfiguration can be activated when creating a new object (e.g. by "New object" in the local object menu or by pressing the Insert key after selecting the object) and is included in the group: " / Communications / BACnet protocol".

This preconfiguration can be used with the objects: PmFolder or PmRoot.

- The panel is used for communication testing and it is not essential for the functionality.
Preconfiguration for serial port.

The created preconfigured connection is usually functional immediately. In other cases, it is necessary to obtain the connection parameters specified by the device manufacturer or in the documentation: PmBACnet - Driver for communication via the BACnet protocol.

These configurators can be set before the preconfiguration is created:
The name of created objectName of the object created in the application object tree. This is a system name and must not contain empty string, diacritics, spaces and the first character must not be a number.

Default: "BACnet"

Network addressNetwork address to which the communication will be connected. The address can be entered by both IP address (e.g. or by name (e.g. server11).

Macro expression can be used for input (it is evaluated while the application is launching).

After this preconfiguration is created, the configurator is se to: PmComm > Settings of the Ethernet parameters > Network address
Create examples of testing dataA set of exemplary data is created
Communication refresh rate [ms]The time period in milliseconds to be used for reading the data by the PROMOTIC application. After this preconfiguration is created, the configurator is se to: PmCommData > Parameters > Communication refresh rate [ms]
Create panel "Received data"Creates a panel that monitors the statistics of communication values
Panel titleDisplayed in the panel header
Create PmCommMsg for reading information from the PLCCreates the PmCommMsg object that allows to read information from the connected PLC.
Creates panel that is used for displaying and saving information from the PLC.The panel is used for running the Run method and also for saving the information into a file.
© MICROSYS, spol. s r. o.Tavičská 845/21 703 00 Ostrava-Vítkovice